Stamped Double Cable Clamp, Stainless Steel, Type 304, for 3/16" Cable. Stamped clamps should not be used for critical applications.
Termination Efficiency Rating: 80%
Note: Sized for 7x19 stainless steel cable. If using 7x7 galvanized cable or 1x19 stainless steel cable, please use next larger size. When upsizing, load test the connection to ensure desired holding strength is achieved.
In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.