Pad Eye, Square - 1/4 inch size, Stainless Steel, Type 316.
- Not intended for overhead lifting.
- Rated capacities (if applicable) apply to in-line static loads only.
See our blog to learn how angles affect loading of eye bolts, eyenuts, and similar rigging products.
|Pad Eye Thickness (A):||1/4 inches|
|Base Width (B):||1.31 inches|
|Base Length (C):||1.56 inches|
|Overall Height (H):||1 inches|
|Hole Diameter:||0.18 inches|
|Center Hole to Hole (short):||0.972 inches|
|Center Hole to Hole (long):||1.164 inches|