How to Use Tyler Tool Cable Pullers

Posted by Beth Smith on 3/2/2018 to How To...

How to Use Tyler Tool Cable Grips

Posted by Beth Smith on 2/23/2018 to How To...
Cable grips are used to temporarily pull tension on a cable or rope when you need more pulling force than can be done by hand. They can be temporarily clamped onto a cable at any point allowing the cable to be tensioned and fastened to another product for a permanent connection.
Watch our video above or "Read More" for a text and picture version on how to use cable grips.

Tyler Tool Lever Hoists: Features and Operation

Posted by Beth Smith on 2/16/2018 to How To...
Lever hoists are mechanical devices that utilize internal gears and a handle to provide leverage to raise and lower loads.
Watch our video or "Read More" for more information on the operation and features of Tyler Tool Lever Hoists.

How to Select and Install Eye Bolts

Posted by Beth Smith on 2/9/2018
Eye bolts are commonly used in an assembly to lift or suspend a load. The different styles of eye bolts allow them to be attached to wood posts, steel tubing, or directly into threaded holes.
Watch our video or "Read More" to find out what type of eye bolt will be best for your assembly and how to install it.

Tyler Tool Manual Chain Hoists: Features and Operation

Posted by Beth Smith on 1/26/2018 to How To...
Manual chain hoists are a hand controlled loop of chain with a geared transmission that allows you to easily lift a load. E-Rigging carries the Tyler Tool brand of chain hoists ranging from half ton to 5 ton load lifting capacity.

Watch our video or "Read More" to find out how you can put this product to use for your application.

How to Select, Install, and Use Beam Clamps & Beam Trolleys

Posted by Beth Smith on 1/19/2018 to How To...
Chain and lever hoist are most commonly used for applications that require a load to be lifted or suspended overhead. However, when load bearing beams are present, attaching the hoists to the beam can present a challenge, and that's where beam clamps and trolleys come into play. Watch our video for useful information on beam clamps and trolleys, and how you can safely install and put them to use for your application.
"Read More" to view the text and picture version of this video.

How to Select and Use Swage Sleeves

Posted by Beth Smith on 1/12/2018 to How To...
Swaging sleeves for steel cable assemblies is one of the most commonly performed rigging functions for lighter duty applications. Watch our video for everything you need to know in order to safely and correctly swage sleeves for your next application.
For a text and picture version of this information, keep reading.

Materials and Finishes to Combat Corrosion

Posted by Beth Smith on 1/5/2018 to How To...
Rigging Products are often subjected to conditions where corrosion may be a factor. Check out our video for an overview of the materials and finishes that are most often used in the manufacturing of rigging fittings, cable, and chain.
If you would prefer a text and picture version of this information, keep reading.

How to Select and Use Turnbuckles

Posted by Beth Smith on 12/28/2017 to How To...
Are you looking for a product to help take up slack in your straight pull, inline rigging assembly? The turnbuckle is what you will need. Watch our video explaining the different styles of turnbuckles and how to use them in your next project.
If you prefer a text and picture version of the information, read more.

How to Install Wire Rope Clips

Posted by Beth Smith on 12/21/2017 to How To...
Have you ever wondered how to correctly install wire rope clips and what the phrase "Never saddle a dead horse." means? Below you will find our informative video explaining these things.
If you need help selecting the best wire rope clip for your project, head over to our YouTube Channel or Wire Rope Clip page for more videos and information.
If you would prefer simple text and picture explanations of the information, keep reading.
If you have any questions, please contact our team using the link at the end of the article. We look forward to helping you get your next rigging project started.

How to Select the Right Wire Rope Clip

Posted by Beth Smith on 12/14/2017 to How To...

Below is our video explaining different wire rope clips and the different environments in which each wire rope clip is best suited.

If you would prefer a text and picture explanation of the video, keep scrolling.

If you are seeking information on the proper installation of wire rope clips, please look to our Wire Rope Clip page, our YouTube Channel, or the direct link to the video at the end of this article .

The Lindale Star

Posted by Matt Champagne on 12/11/2017 to Customer Projects
The holiday season is fast approaching, and with it come heartwarming stories of traditions started long ago. Traditions based on hope for a brighter tomorrow. One such story is the story of the Lindale Star.

How to Select and Install Wire Rope Thimbles

Posted by Tyler Hall on 10/25/2017 to How To...
We've made a helpful how-to video explaining E-Rigging's thimble offering.

If you prefer text and picture instructions, you're in the right place, read more for the full article.

Cable Railing Resources

Posted by Matt on 7/4/2017 to Customer Projects

We love it when our customers send us pictures of their newly installed cable railings. Cable railings make for a beautiful, functional addition to any porch or deck. Here’s a picture sent to us by one of our loyal customers.

Send Us Your Pictures

Posted by Matt on 6/1/2017 to Customer Projects
There's no feeling like the feeling of a job well done. The feeling when all of your planning, time, and effort come together to create something to be proud of. It makes you want to shout from the rooftops and tell the world about your accomplishments. We've got great news! We love seeing our products put to good use in your projects! You can share your pictures with us on Facebook, Twitter, and Instagram, or email them to us at We would be happy to show off your work.

Like Mike in Tualatin, OR.

Click below for more pictures.

New Chain and Lever Hoists, Beam Clamps, and Cable Pullers

Posted by E-Rigging Team on 11/11/2013 to News

Working Load Limits are Important!

Posted by E-Rigging Team on 10/31/2013 to News
Be sure to check and understand your working load limits before attempting a lift. Not only could your rigging fail, you might exceed the lifting capacity of your crane! More Pictures
Always Check your Working Load Limits!