Please see our shipping page for UPS delivery date policy updates Click here for details.
3/16" Zinc Plated Copper Sleeve Image 1
3/16" Zinc Plated Copper Sleeve Image 4
3/16" Zinc Plated Copper Sleeve
3/16" Zinc Plated Copper Sleeve
3/16" Zinc Plated Copper Sleeve
Open in new window
3/16" Zinc Plated Copper Sleeve

3/16" Zinc Plated Copper Sleeve

review 0 Review(s) 0 0 5 Review this item
0 Questions
$1.09

InStock

SHIPS TODAY In Stock

Qty.
Product Specs Part No. 62125051
Material Zinc Plated Copper
Weight 0.05 lb

Description

3/16 in. zinc plated copper duplex sleeve, sometimes called hourglass sleeves, or oval sleeves. Max After Swage Dimension: 0.475 in. Recommended for use with stainless steel cable.

If properly swaged the termination efficiency for the copper sleeve will be 90%.
Spec Sheet
three-sixteenths-inch-Copper-Sleeve-specification-diagram
NameValue
Inside Diameter (A):0.45 inches
Length (L):0.672 inches
After Swage:0.475 inches
Crimps Per Sleeve:4
Swager Cavity Size:3/16 inches
Special Instructions

In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.

Sleeve and Button Swaging Instructions

Before using this tool, examine and ensure that the bolt and nut of the swager are tight.

Cut cable to the required length and lace the cable through the sleeve so that the end will still protrude after crimping.

Hit Tools Swaging Instructions

Properly insert sleeve into he correct cavity and line up the sleeve between the swager jaws with the long axis perpendicular to the jaws.

Cable Crimping Instructions

Swaging Sleeves

Swage each sleeve with the correct number of swages listed in the in the table below following the swage sequence shown below.

Wire Rope Crimp Instructions
Cable Diameter Aluminum Sleeves Copper Sleeves
3/64" 2 2
1/16" 2 2
3/32" 2 2
1/8" 3 3
5/32" 3 3
3/16" 4 4
1/4" 4 4
5/16" 5 4
3/8 5 5

Lap splices can be made by 2 oval sleeves. Keep a short space between the sleeves.

Cable Lap Splice Instuctions

A stopper can be made by crimping a button stop sleeve.

Cable Button Stop Swaging Instructions

Each HIT Swager has a gauge. Check a crimped sleeve with the gauge. If the presses portion won't go into the gauge freely, press the sleeve completely again.

Cable Crimping Gauge Instructions
Note:
Size
3/16 inches
Length
Certificates
Product Type
ferrules > copper
Customer Reviews
[rating] Stars
[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
Questions and Answers

Recently Viewed Items