Please see our shipping page for UPS delivery date policy updates Click here for details.
3/8" Stainless Steel Oval Sleeve Image 1
3/8" Stainless Steel Oval Sleeve Image 4
3/8" Stainless Steel Oval Sleeve
3/8" Stainless Steel Oval Sleeve
3/8" Stainless Steel Oval Sleeve
Open in new window
3/8" Stainless Steel Oval Sleeve

3/8" Stainless Steel Oval Sleeve

review 0 Review(s) 0 0 5 Review this item
0 Questions
$7.78

InStock

SHIPS TODAY In Stock

Qty.
Product Specs Part No. 62126040
Material Type 316 Stainless Steel
Weight 0.19 lb

Description

Oval Sleeve - 3/8 inch size, Stainless Steel, Grade 316.

Spec Sheet
three-eighths-inch-stainless-oval-sleeve-specification-diagram
NameValue
Inside Width (A):3/8 inches
Outside Width (B):0.75 inches
Outside Height (C):1.13 inches
Overall Length (L):1.38 inches
After Swage:0.75 inches
Special Instructions

In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.

Sleeve and Button Swaging Instructions

Before using this tool, examine and ensure that the bolt and nut of the swager are tight.

Cut cable to the required length and lace the cable through the sleeve so that the end will still protrude after crimping.

Hit Tools Swaging Instructions

Properly insert sleeve into he correct cavity and line up the sleeve between the swager jaws with the long axis perpendicular to the jaws.

Cable Crimping Instructions

Swaging Sleeves

Swage each sleeve with the correct number of swages listed in the in the table below following the swage sequence shown below.

Wire Rope Crimp Instructions
Cable Diameter Aluminum Sleeves Copper Sleeves
3/64" 2 2
1/16" 2 2
3/32" 2 2
1/8" 3 3
5/32" 3 3
3/16" 4 4
1/4" 4 4
5/16" 5 4
3/8 5 5

Lap splices can be made by 2 oval sleeves. Keep a short space between the sleeves.

Cable Lap Splice Instuctions

A stopper can be made by crimping a button stop sleeve.

Cable Button Stop Swaging Instructions

Each HIT Swager has a gauge. Check a crimped sleeve with the gauge. If the presses portion won't go into the gauge freely, press the sleeve completely again.

Cable Crimping Gauge Instructions
Note:

Recommended Swage Tool: Electric Powered Hydraulic Swager

Size
3/8 inches
Length
Certificates
Product Type
stainless > ferrules
Customer Reviews
[rating] Stars
[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
Questions and Answers

Recently Viewed Items