Stainless Steel Wire Rope Clip - Type 316 cast s.s. for 3/8 in. wire rope. Nut Size: 11/16 inch.
Termination Efficiency Rating: 80%
In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.
Wire Rope Clip Installation
It is important to ensure wire rope clips are installed properly. Incorrect installation can reduce the working load limit by 40%. Below are general guidelines for installing wire rope clips.
Parts of a Wire Rope Clip & Assembly
Clip Installation Diagram
Below is a diagram showing proper clip installation it is imperative that you install the saddle on the live end of the wire rope. An easy to remember saying to help remember proper clip installation is: