Dimensions are in inches unless otherwise noted.
*No Extra Nuts
Working like a hand swage stud, this type of turnbuckle is fitted with a threaded stud on one end so that a washer and nut can be attached to secure the turnbuckle on the back side of the post. On the other end is a hand swage stud that is secured to the cable end by crimping three times with a 20 inch Tyler Tools hand swage tool. The fitting is made of corrosion resistant type 316 stainless steel and is available in both 1/8 and 3/16 cable sizes.
Please see our Stainless Steel Cable Railing Hand Swage Tool Instructions for proper swaging procedures.