Stainless Steel Stamped Single Cable Clamps

3/32 inch - 5/16 inch Diameter

Type 304 Stainless Steel Stamped Single Cable Clamp
Type 304 Stainless Steel Stamped Single Cable Clamp Diagram

Dimensions are in inches unless otherwise noted.

Size Wrench Size for Nuts (Preferred US Size) Wrench Size for Nuts (Alternate Metric Size) Torque (ft/lb)** Length (A)Width (B)Height (C)Bolt Diameter (D)Weight (lbs)
3/32"   9/32 7mm 2 0.560.250.500.160.030
1/8"   9/32 7mm 2 0.690.310.500.160.030
5/32"   5/16 8mm 3 0.750.440.690.190.050
3/16"   5/16 8mm 3 1.000.500.690.190.060
1/4"   7/16 10mm 15 1.160.690.880.250.090
5/16"   1/2 13mm 15 1.500.881.190.310.130

*Sized for 7x19 stainless steel cable. If using galvanized cable or 1x19 stainless steel cable, please use next larger size. When upsizing, load test the connection to ensure desired holding strength is achieved.

**Based on Clean, un-lubricated threads. Table above shows minimum torque required to reach maximum holding power of wire rope clip.

***Stamped clamps should not be used for critical applications.

6 products