Dimensions are in inches unless otherwise noted.
Stud receivers are fittings designed to accept invisi-studs and are used almost exclusively in cable rail and balustrade applications. The stud receivers are machined to have a dome or button shape on the end and in that end, have a hex cavity cut into it to accept a hex shaped allen wrench. The stud receiver is a tensioning fitting and once the invisi-stud is inserted into the receiver tube, the receiver is turned using an allen wrench. As the receiver is turned, the invisi-stud is then retracted inside the receiver and the slack in the cable is reduced. Stud receivers come in sizes to accept mating with invisi-studs attached to 1/8, 3/16 and 1/4 inch cable. These fittings are also made of marine grade type 316 stainless steel cable.
Please see our Stainless Steel Cable Railing Hand Swage Tool Instructions for proper swaging procedures.