0
1/4" Stainless Steel Swageless Stud Image 1
1/4" Stainless Steel Swageless Stud Image 1
1/4" Stainless Steel Swageless Stud Image 2
1/4" Stainless Steel Swageless Stud
1/4" Stainless Steel Swageless Stud
1/4" Stainless Steel Swageless Stud
Open in new window
1/4" Stainless Steel Swageless Stud

1/4" Stainless Steel Swageless Stud

review 0 Review(s) 0 0 5 Review this item
0 Questions
$29.12

InStock

SHIPS TODAY In Stock

Qty.
Product Specs Part No. 51632310
Material Type 316 Stainless Steel
Weight 0.39 lb
Working Load Limit (WLL) 400 lbs

Description

1/4 inch cable diameter, Grade 316, Stainless Steel Swageless Stud. Working Load Limit (WLL): 400 lbs.
Spec Sheet
quarter-inch-stainless-steel-swageless-stud-specification-diagram
NameValue
Cable Size (A):1/4 inches
Stud Diameter (B):1/2 inches
Thread Length (L1):3.10 inches
Overall Length (L):5.66 inches
Special Instructions

Swageless Fitting Installation Instructions

(View PDF)
  1. Place the cable through the main body of the fitting.
  2. Insert the copper sleeve to the center strand and spread all wires around the sleeve evenly.
  3. Adjust the wire to the same level and push the wire and sleeve down.
  4. Place the wedge on top of the copper sleeve and wire. (For 3/8" cable size, the additional round cylinder part should be placed on top of the sleeve before placing the wedge.)
  5. Place the top cap and tighten with wrench.
  6. You are ready to go.
Note: Before installation, make sure each fitting has one piece of copper sleeve and one piece of wedge inside.

Swageless Installation Instructions
Note:
Size
1/4 inches
Length
Certificates
Product Type
stainless > swageless
Customer Reviews
[rating] Stars
[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]
Questions and Answers

Recently Viewed Items