Huge savings across the entire site for the winter season! - Deals Here
1/16" Aluminum Sleeve (Bag Qty. of 100) Image 1
1/16" Aluminum Sleeve (Bag Qty. of 100) Image 1
1/16" Aluminum Sleeve (Bag Qty. of 100) Image 2
1/16" Aluminum Sleeve (Bag Qty. of 100) Image 3
1/16" Aluminum Sleeve (Bag Qty. of 100)
1/16" Aluminum Sleeve (Bag Qty. of 100)
1/16" Aluminum Sleeve (Bag Qty. of 100)
Open in new window
1/16" Aluminum Sleeve (Bag Qty. of 100)

1/16" Aluminum Sleeve (Bag Qty. of 100)

review 0 Review(s) 0 0 5 Review this item
0 Questions
On sale $3.09
Retail Price:$4.65
Your Savings:$1.56(34%)



Product Specs Part No. 62123011
Material Aluminum
Weight 0.13 lb


1/16 in. aluminum duplex sleeves, sometimes called hourglass sleeves, or oval sleeves. Max After Swage Dimension: 0.185 in. Bag Quantity of 100

If properly swaged the termination efficiency for the aluminum sleeve will be 90%.

Aluminum sleeves are not recommended when using stainless steel cable, use Zinc Plated Copper Sleeves instead.

Spec Sheet
Width (A):0.172 inches
Height (B):0.25 inches
Inside Width (C):0.078 inches
Length (D):0.375 inches
After Swage:0.185 inches
Crimps Per Sleeve:2
Swager Cavity Size:1/16 inches
Special Instructions

In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.

Sleeve and Button Swaging Instructions

Before using this tool, examine and ensure that the bolt and nut of the swager are tight.

Cut cable to the required length and lace the cable through the sleeve so that the end will still protrude after crimping.

Hit Tools Swaging Instructions

Properly insert sleeve into he correct cavity and line up the sleeve between the swager jaws with the long axis perpendicular to the jaws.

Cable Crimping Instructions

Swaging Sleeves

Swage each sleeve with the correct number of swages listed in the table below following the swage sequence shown below.

Wire Rope Crimp Instructions
Cable Diameter Aluminum Sleeves Copper Sleeves
3/64" 2 2
1/16" 2 2
3/32" 2 2
1/8" 3 3
5/32" 3 3
3/16" 4 4
1/4" 4 4
5/16" 5 4
3/8 5 5

Lap splices can be made by 2 oval sleeves. Keep a short space between the sleeves.

Cable Lap Splice Instuctions

A stopper can be made by crimping a button stop sleeve.

Cable Button Stop Swaging Instructions

Each HIT Swager has a gauge. Check a crimped sleeve with the gauge. If the presses portion won't go into the gauge freely, press the sleeve completely again.

Cable Crimping Gauge Instructions
1/16 inches
Product Type
ferrules > alum
Customer Reviews
[rating] Stars
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
Questions and Answers

Related Items

In Stock
In Stock
In Stock
More Available Soon
4' X 5300 lbs. Capacity Polyester Round Sling
$12.00  $10.97
In Stock
In Stock

Recently Viewed Items