1. Home
  2. Products
  3. Rigging Hardware
  4. Turnbuckles
  5. Galvanized Eye x Eye Turnbuckles

Galvanized Eye x Eye Turnbuckles

1/4 inch - 1 inch Diameter

Galvanized Eye & Eye Turnbuckle
Galvanized Eye & Eye Turnbuckle Diagram
Video

Dimensions are in inches unless otherwise noted.

Thread Diameter (A) x Take Up (BB)WLL (lbs)Weight (lbs)J OpenK ClosedM OpenN ClosedRX Closed
1/4" x 4"5000.2911.947.9412.388.380.811.76
5/16" x 4-1/2"8000.4813.929.4214.489.980.952.20
3/8" x 6"12000.7517.5611.5618.2412.241.132.48
1/2" x 6"22001.7219.9413.9420.8214.821.413.56
1/2" x 9"22002.0026.9415.9426.9616.961.443.23
1/2" x 12"22002.6332.2320.2333.1121.111.413.54
5/8" x 6"35002.7521.7215.7222.7216.721.804.35
5/8" x 9"35003.5027.9317.6828.9318.681.753.90
5/8" x 12"35004.1234.0622.0635.0623.061.804.34
3/4" x 6"52004.2223.2417.2424.5018.502.095.12
3/4" x 9"52004.7529.8819.3831.1220.622.094.69
3/4" x 12"52006.1235.6423.6436.9024.902.095.09
3/4" x 18"52007.8347.6429.6448.9030.902.095.12
1" x 12"1000013.0038.2426.2440.0028.003.006.50

*Proof Load is 2.5 times the Working Load Limit. Breaking Load is 5 times the Working Load Limit.

Products [14]

E-Rigging eye x eye turnbuckles come in a wide selection of sizes and take-up lengths and are hot dip galvanized to guard against corrosion. All three of the turnbuckle's components, the body and the two eye type end fittings are drop forged and meet all of the requirements of U.S. Federal Specification FF-T-791B.

© Copyright E-Rigging.com. All Rights Reserved. Images and content on this site are property of E-Rigging.com and shall not be used elsewhere. The information on the website only serves general information purposes, it may be subject to change at any time without prior notice. Privacy Policy