Zinc Plated Copper Hour Glass Sleeves

3/32 inch - 3/8 inch Diameter

Zinc Plated Copper Sleeve
Zinc Plated Copper Sleeve Diagram

Dimensions are in inches unless otherwise noted.

Cable & Sleeve Size A L Weight (lbs) After Swage Dimension Crimps Per Sleeve Swager Cavity Size
3/32 0.224 0.37 0.01 0.265 2 3/32
1/8 0.327 0.492 0.02 0.350 3 1/8
3/16 0.45 0.672 0.05 0.475 4 3/16
1/4 0.515 0.809 0.08 0.580 4 1/4
5/16 0.668 1.02 0.12 0.735 5 5/16
3/8 0.728 1.113 0.16 0.802 5 3/8

If properly swaged the termination efficiency for the copper sleeve will be 90%

In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.

Products
6 products