Aluminum Hour Glass Sleeves

1/16 inch- 3/8 inch Diameter

Aluminum Sleeve
Aluminum Sleeve Diagram

Dimensions are in inches unless otherwise noted.

Cable & Sleeve Size  A B C D Pkg. Qty. After Swage Dimension Crimps Per Sleeve Swager Cavity Size
1/16 0.172 0.25 0.078 0.375 100 0.185 2 1/16
3/32 0.278 0.404 0.125 0.5 100 0.265 2 3/32
1/8 0.343 0.5 0.156 0.625 100 0.350 3 1/8
5/32 0.375 0.562 0.187 0.6875 100 0.395 3 5/32
3/16 0.44 0.655 0.223 1 50 0.475 4 3/16
1/4 0.536 0.818 0.29 1.125 50 0.580 4 1/4
5/16 0.687 1.031 0.375 1.25 50 0.735 5 5/16
3/8 0.75 1.156 0.438 1.4375 20 0.802 5 3/8

If properly swaged the termination efficiency for the aluminum sleeve will be 90%.

Note: Aluminum sleeves are not recommended when using stainless steel cable, use Zinc Plated Copper Sleeves instead.

In order to achieve maximum strength on vinyl coated cable, please remove the vinyl coating from the cable in the area where the wire rope clip, sleeve, or button will be affixed. When selecting termination fittings for vinyl coated cable, select the fitting that is sized to the diameter of the cable, not the diameter of the coating. If you affix the termination fitting over the vinyl coating, the strength of the assembly will be greatly reduced.

Products
8 products