5/8 inch x 8 inch size, Shoulder Eye Bolt. Working Load Limit (WLL): 3500 lbs. Hot Dip Galvanized Steel, Drop Forged.

Name | Value |
---|---|
Working Load Limit (WLL): | 3500 lbs |
Shank Diameter (A): | 0.63 inches |
Shank Length (B): | 8 inches |
Outside Eye Diameter (C): | 2.31 inches |
Inside Diameter (D): | 1.25 inches |
Overall Length (E): | 10.56 inches |
Threaded Length (T): | 4 inches |
Design Factor: | 5 to 1 |
Dimensions are in inches unless otherwise noted.
Working Load Limit (lbs) | Shank Diameter (A) | Shank Length (B) | Outside Eye Diameter (C) | Inside Diameter (D) | Overall Length (E) | Threaded Length (T) |
---|---|---|---|---|---|---|
500 | 0.25 | 2 | 1 | 0.5 | 3.13 | 1.5 |
500 | 0.25 | 3 | 1 | 0.5 | 4.13 | 1.5 |
500 | 0.25 | 4 | 1 | 0.5 | 5.13 | 2 |
800 | 0.31 | 2.25 | 1.25 | 0.63 | 3.63 | 1.5 |
800 | 0.31 | 3.25 | 1.25 | 0.63 | 4.63 | 1.5 |
800 | 0.31 | 4.25 | 1.25 | 0.63 | 5.63 | 2.5 |
1200 | 0.38 | 2.5 | 1.5 | 0.75 | 4.25 | 1.5 |
1200 | 0.38 | 3 | 1.5 | 0.75 | 4.75 | 1.5 |
1200 | 0.38 | 4.25 | 1.5 | 0.75 | 6.25 | 2 |
1200 | 0.38 | 5 | 1.5 | 0.75 | 6.75 | 2.5 |
1200 | 0.38 | 6 | 1.5 | 0.75 | 7.75 | 3 |
1200 | 0.38 | 8 | 1.5 | 0.75 | 9.75 | 4 |
2200 | 0.5 | 2 | 2 | 1 | 4.31 | 1.88 |
2200 | 0.5 | 3.25 | 2 | 1 | 5.5 | 1.5 |
2200 | 0.5 | 4.5 | 2 | 1 | 6.75 | 2 |
2200 | 0.5 | 6 | 2 | 1 | 8.25 | 3 |
2200 | 0.5 | 8 | 2 | 1 | 10.25 | 4 |
2200 | 0.5 | 10 | 2 | 1 | 12.25 | 4 |
2200 | 0.5 | 12 | 2 | 1 | 14.25 | 4 |
3500 | 0.63 | 4.5 | 2.31 | 1.25 | 7.25 | 2 |
3500 | 0.63 | 6 | 2.31 | 1.25 | 8.56 | 3 |
3500 | 0.63 | 8 | 2.31 | 1.25 | 10.56 | 4 |
3500 | 0.63 | 10 | 2.31 | 1.25 | 12.56 | 4 |
3500 | 0.63 | 12 | 2.31 | 1.25 | 14.56 | 4 |
5200 | 0.75 | 4.5 | 2.75 | 1.5 | 7.75 | 2.5 |
5200 | 0.75 | 6 | 2.75 | 1.5 | 9.13 | 3 |
7200 | 0.88 | 5 | 3.5 | 1.75 | 9.25 | 2.5 |
7200 | 0.88 | 8 | 3.5 | 1.75 | 12.13 | 4 |
10000 | 1 | 6 | 3.75 | 2 | 10.5 | 3 |
10000 | 1 | 9 | 3.75 | 2 | 13.25 | 4 |