HAAS Revo

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

SKU: HSA12401-001
Size: 1/8"
Price:
Sale price$4.49
Stock:
646 In Stock

In Stock Orders Ships Same Day!!!

You can add more than the in-stock qty to your cart, and we will ship your complete order once all the stock arrives. In Stock Orders the ship same day if placed before 2PM CT. All items in your cart must be listed as In Stock. Place separate orders on in-stock and back ordered items if you want items to ship the same day. Applies to UPS shipping methods only, LTL Freight may go out the same day if carrier pick-up schedule permits.

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

Register to receive a notification when this item comes back in stock.

Notify me when available When will it arrive?
Return Policy: We only accept full assemblies as returns, see our return policy for more info.
Ordering Tip: Please considering a few more than what you need to prevent delays in your project from dropped products or installation mistakes.
Material: Type 316 Stainless Steel

Ultimate Tensile Strength (UTS):

Working Load Limit (WLL):

Minimum Breaking Load (MBL):

Size:

Length:

Weight:

Standard Reel Size (Flange Diameter x Height):

Shipping Note:

Videos

Description

HAAS Revo Cable Rail Swage Stud Tension Fitting Assembly

QUESTIONS & ANSWERS

  • In the description for this tensioner, it mentions it could handle up to 100 feet of cable run (3/16 size). In my plans for my DIY cable railing system, I was under the impression that I would need to split several of my straight long runs (40 ft) into shorter runs (2 @ 20ft). It sounds like the use of this tensioner it would allow me to keep that as one run and avoid splitting into 2 runs. Would this tensioner be strong enough? Many thanks for any advice. P.S. I will have 2x2 metal corner posts, 1/4 inch thick.

    It really depends on the spacing between the posts holding up the cable.  If you are supporting the cable every 4-6 feet you can run with 1 tensioner upwards of 100 feet.  It is recommended to use 2 tensioners (1 on each side) for cable that is not supported every 8-10 feet or more, and even then, you may still see some sag in the line.

  • Can the 1/8" Hydraulic Cable Railing Swager be used with the REVO family tension fittings? Your listing for the REVO tension fitting says that the Crenshaw swager must be used, but the hydraulic swager listing says that it can be used for REVO and AXIS fittings. Please clarify.

    Yes the hydraulic is our temporary solution to the swaging process while we put the Crenshaw tool through some tests.