Double OT Clamps are used to connect 2 ropes together, or add strength to an eye formed with a rope clamp or another double OT clamp.
Instructions:Put screws in unthreaded half, and place on flat surface with screws facing up.Lay rope in clamp to form the desired eye length.Place the clamp half with threaded inserts on top and lightly press the pieces togetherWhile holding the assembly in place, turn the assembly and tighten the screws evenly
Notes:Includes stainless steel screw and brass insert.Do not exceed the rope manufacturer's recommended load.The Rope Clamps and Double OT Clamps have been designed for solid braid nylon and solid braided Polypropylene ropes. They really work great with many other different ropes as well.Double OT clamps make it easy and safe for anyone to put a loop in a rope, or join 2 pieces together.Designed for use with synthetic fiber rope only, NOT to be used with wire rope or cable.If you are using a triple strand (dense) rope which is stiff, a Kernmantle Rope or Hemp rope you must go to a larger size rope clamp for it to fit properly.
Minimum Breaking Loads:3/8" - 1000 lbs1/2" - 1500 lbs5/8" - 2000 lbs3/4" - 3000 lbs
Fit/Size Guidelines:3/16" Rope Clamps - 3/16" cordage ( works well with 5mm rope)1/4" Rope Clamps - 1/4" or 5/16" rope/cordage (works well with 8mm rope)3/8" Rope Clamps/Double OT Clamps - 3/8" rope/cordage (works well with 9mm rope)1/2" Rope Clamps/Double OT Clamps - 7/16" or 1/2" rope/cordage (works well with 12 & 13 mm rope)5/8" Rope Clamps/Double OT Clamps - 9/16" or 5/8" rope/cordage (works well with 15 & 16 mm rope)3/4" Rope Clamps/Double OT Clamps - 3/4" rope/cordage (works well with 19mm rope)